LiDAR Coverage for the Eastern USA

General discussions of measurement techniques and the results of testing of techniques and equipment.

Moderators: edfrank, dbhguru

#41)  Re: LiDAR Coverage for the Eastern USA

Postby George Fieo » Tue Dec 19, 2017 11:38 pm

M.W.Taylor wrote:I tried to process Patapsco Valley State Park and rolled snake eyes. The LiDAR is missing crown data and basically 2-dimenstional. The only LiDAR set I could find for that area is from 2004 and of the lowest resolution I've seen. Will have to wait until higher resolution LiDAR comes out. Sorry I could not help you on this. Attached is the map of the area I downloaded LiDAR for and the name of the LiDAR files from the original source.


2004 MD DNR LiDAR Anne Arundel, Charles Howard & Marys Counties


Thanks Michael,

Your definitely on the nice list this year with all the LiDAR data coverage.

I was in Patapsco Valley SP yesterday in the area dead center of the tile.  Very promising. I measured eight tulips over 150' and recorded a new height record white ash for Maryland. Rucker Index is 129.83' and should hit the mid 130's.

George
User avatar
George Fieo
 
Posts: 114
Joined: Sat Mar 13, 2010 2:24 pm
Location: Limerick, Pa.
Has Liked: 0 times
Has Been Liked: 110 times
Print view this post

#42)  Re: LiDAR Coverage for the Eastern USA

Postby a_blooming_botanist » Tue Jan 16, 2018 5:29 pm

Michael,

I would like to take you up on your kind offer, if it still stands. I have been exploring several adjacent pieces of conservation land in Petersham, MA, which are owned by Harvard Forest, the Trustees of Reservations, and Mass Audubon, respectively. The area of interest roughly follows the East Branch of the Swift River from just northeast of Connor Pond in a southwest direction toward the Quabbin Reservoir. I have included an image showing the area to which I am referring.

               
                       
Petersham MA area of interest.jpg
                                       
               

I’ve found several eastern white pines that stand just over 140’ tall, but my search of the terrain has not been exhaustive. I’d be curious to see what the LiDAR data show…

Also, can you recommend any learning material for getting into processing LiDAR? I would love to be able to do this myself some day.

Many thanks,
Jared
User avatar
a_blooming_botanist
 
Posts: 59
Joined: Fri Mar 11, 2016 11:09 pm
Location: eastern-central Massachusetts
Has Liked: 103 times
Has Been Liked: 58 times
Print view this post

#43)  Re: LiDAR Coverage for the Eastern USA

Postby AndrewJoslin » Fri Jan 19, 2018 2:43 pm

The area Jared is showing in Petersham was hit by the famous F4 or F5 (different opinions) Worcester tornadao of 1953. I've heard anecdotally that it initially touched down on the hill just to the west of Connors Pond. I was shown the physical path of the tornado in 1967, it crossed roughly over the southern third of Connors Pond headed east/southeast. it's clear where the tornado went through after Connors Pond, the successional growth in the path is visible vs. the bordering pre 1953 woods, at least it was in '67 ;-)

It's pretty neat that there are 140 footers in the area considering the tornado event. There should be evidence in the crown forms of any older standing pines and other tree species remaining near the path, broken tops/regrowth etc. Clearly tornado damage can be extremely local to the path and it would make sense that the standing 140's on theses lands were unaffected or marginally affected by the storm.

LIDAR visualization may actually show the tornado path, that would be cool.
-AJ
User avatar
AndrewJoslin
 
Posts: 399
Joined: Sun Mar 14, 2010 8:36 pm
Location: Jamaica Plain, Massachusetts
Has Liked: 161 times
Has Been Liked: 88 times
Print view this post

Previous

Return to Measurement and Dendromorphometry

Who is online

Users browsing this forum: No registered users and 2 guests